Krix IC-52 (ATMOSPHERIX A20)

ATMOSPHERIX A20
IN CEILING

• Sound directed to your listening position
• Discreet home cinema
• Fully-enclosed back boxFeaturing an angled baffle behind the slim magnetic grille, the Atmospherix A20 directs sound towards your seating position for improved clarity in high definition music and moviesFOCUSED EXPERIENCEThe Atmospherix A20 incorporates a 20 degree angled baffle to project the sound to your primary listening area. This means less sound is reflected off walls and other surfaces. Your experience is clearer, there is a more three-dimensional soundstage, better definition for music listening, more articulate dialogue, and more realistic and involving sound effects in movies.The bass driver and tweeter are separately mounted on the front baffle, like Krix’s bookshelf speakers, for true hi-fi performance. Bass and midrange clarity are delivered through a massive 130mm bass driver with a large magnet and copper shorting ring, while the 26mm ring radiator delivers high frequencies. A fully-enclosed back box optimises performance from the bass driver in any installation setting and protects from ceiling debris and sound leakage. Being tonally balanced to the Krix floorstanding and bookshelf speakers, the Atmospherix A20 are ideal front or rear speakers for home theatres, but also provide a dynamic stereo music sound.

  The slim paintable bezel grille, in rust-resistant stainless steel, is held in place by easy installation magnets, hiding the true magic of the Atmospherix A20 from view.

  For the ultimate sound experience at home, play it through Krix.

  SOLD AS SINGLE SPEAKERS

  Technical Specifications

  Frequency Range
  45Hz-40kHz in room response

  Power Handling
  20 – 120 Watts RMS recommended amplifier power

  Sensitivity
  90dB for 2.83 volts at 1 metre

  Impedance
  Nominally 6 Ohms (minimum 3.6 Ohms)

  Configuration
  2-way

  Enclosure Type
  Bass reflex, front vented

  Dimensions
  295mm diameter x 193mm mounting depth

  Low Frequency Driver
  Cast aluminium basket with a nominal 130mm (5″) doped curvilinear paper cone. 30mm (1.2″) vented magnet voice coil wound on high temperature kapton former, with copper shorting ring

  High Frequency Driver
  26mm (1”) ring radiator tweeter

  Input Terminals
  Gold plated spring terminals

  Cut-out Diameter
  247mm recommended

  Weight
  2.5kg each