Projector Calibration Assistant

App icon: CIE 1931 chromaticity diagram with the Rec.709 triangle
Projector Calibration Assistant
by Kalibrate · Android

Calibrate your projector from your phone.

Adjust greyscale, gamma, colour and more while you measure, without the projector’s menus covering your test patterns. Available now for JVC D-ILA and Epson projectors. Sony is next, with other brands to follow.

JVC: available now Epson: new in version 1.1 Sony: coming soon More brands to follow iPhone: coming soon
Get it on Google Play Free to connect and view. Try the demo, no projector needed.
Launch offer JVC Pro and Epson Pro £19.99 each until 31 December 2026 (then £24.99)
Android 8.0 or later No account, no ads, no tracking One-off Pro unlock per brand
The app's Basic tab connected to an Epson EH-TW9400, showing contrast, brightness, colour saturation, tint, skin tone, light mode, auto iris and lens iris
The Basic tab, connected to an Epson EH-TW9400. Each tap changes the projector instantly.
What you can adjust

The calibration controls, without the menus.

The app shows only the controls your projector has, on the same scales as the projector’s own menus. JVC projectors report their model; on an Epson, you choose it on the Connect tab.

Greyscale

Gain and offset for red, green and blue, one step at a time, with the current value always on screen. On Epson, colour temperature in Kelvin too.

Gamma

Gamma presets on both brands. On JVC, picture tone, bright and dark levels, and BT.1886 or power-law curves uploaded as a custom gamma. On Epson, the 9-point custom gamma.

Colour management

Hue, saturation and brightness for red, yellow, green, cyan, blue and magenta.

Picture and light

Picture or colour mode, contrast, brightness, colour and tint. JVC: laser level, lens aperture and HDR Quantizer. Epson: skin tone, sharpness, light mode, auto iris, lens iris, and HDR10 and HLG settings.

Panel alignment

JVC: whole-panel and 11 × 11 zone adjustment for red and blue, plus lens focus and lens lock. Epson: alignment memories and powered focus. Use your own crosshatch pattern.

Backups

Save a projector’s calibration to a file and restore it later, or after a firmware update.

Control tabNew

Your projector’s remote buttons on your phone: Menu, Back, OK and the arrows, for anything the app doesn’t have its own control for.

Info

Input signal, resolution, HDR type, light-source hours and more, without opening a menu.

Matches the menu

Epson’s scales were measured step by step on a real projector, so 50 in the app is 50 in the projector’s menu, and 6500K is 6500K.

BT.1886 targets

Targets from your own measurements.

Enter the white and black levels you measured, and the app works out the BT.1886 target for every step. Use the table while you set the projector’s gamma, or on JVC turn it into a 256-point custom curve and upload it.

White48 cd/m²
Black0.003 cd/m²
Gamma2.4
BT.1886 targets for 48 cd/m² white and 0.003 cd/m² black
StimulusTarget cd/m²% of white
10%0.2730.57
20%1.1892.48
30%2.9416.13
40%5.66911.81
50%9.48619.76
60%14.48930.19
70%20.76643.26
80%28.39659.16
90%37.45278.02
100%48.000100.00
Free and Pro

Look for free. Unlock Pro to adjust.

Pro is a one-off purchase through Google Play for each projector brand, with no subscription. You only pay for the brands you work with, and it stays with your Google account if you change phone.

Free

  • Connect over your network and view every setting
  • Picture mode, colour, gamma, CMS and signal information
  • Control tab: the projector’s remote buttons
  • BT.1886 target table
  • Power on and off
  • Demo mode: try every screen without a projector

JVC Pro or Epson Pro Available now

£19.99Each. Launch price until 31 December 2026, then £24.99. One-off purchase per brand.
  • Every adjustment: greyscale, gamma, CMS, picture and light
  • Custom gamma: uploaded curves on JVC, the 9-point custom gamma on Epson
  • JVC: panel alignment and lens focus
  • Epson: iris, alignment memories and focus
  • Save and restore calibration backups

All-brands Pro For calibrators

£49.99One-off purchase. Every brand the app supports, now and in future.
  • Everything in JVC Pro and Epson Pro
  • Sony Pro as soon as it’s added
  • Every brand added after that, at no extra cost
  • One purchase for every projector you work on

Sony Pro will also be sold separately, priced when Sony launches. UK prices including VAT; Google Play shows the price in your own currency.

Supported projectors

JVC and Epson now. Sony next, more to follow.

Available now for JVC D-ILA and Epson projectors with network control (US model names in grey). If your JVC reports a model the app doesn’t recognise, you can pick the nearest one and tell us its ID.

JVC 2024 range

  • DLA-NZ900 RS4200
  • DLA-NZ800 RS3200
  • DLA-NZ700 RS2200
  • DLA-NZ500 RS1200

JVC 2021 range

  • DLA-NZ9 RS4100
  • DLA-NZ8 RS3100
  • DLA-NZ7 RS2100
  • DLA-NP5 RS1100

JVC 2018 range

  • DLA-NX9 RS3000
  • DLA-NX7 RS2000
  • DLA-NX5 RS1000

Epson: tested

  • EH-TW9400 Pro Cinema 6050UB
  • EH-TW8400 Home Cinema 5050UB

Epson: in testing

  • EH-QB1000
  • EH-LS12000 Pro Cinema LS12000
  • EH-LS11000 Home Cinema LS11000
  • EH-LS9000
  • EH-QS100
  • EH-QL3000 / QL7000

Epson models in testing

They’re in the app now and use Epson’s own command list. Until we’ve checked each one on a real projector, some numbers may not match the projector’s menu exactly. Updates follow as each model is tested, starting with the EH-QB1000.

Next in line

Sony home cinema projectors with network control, including the VPL-VW and XW ranges, and more Epson models, including the EH-TW7400. Other brands will follow. Want your projector supported? Email us and tell us which one.

What you need

  • An Android phone or tablet on the same network as the projector
  • JVC: network control switched on in the Network menu, and the network password on 2021 and later models
  • Epson: a fixed IP address, and Standby Mode set to Communication On
  • Your own meter and calibration software for measurements
Questions

Before you download

Does the app take measurements?

No. Keep using your meter and calibration software for measuring. The app is the remote control for the adjustments, so the projector’s menus never cover your patterns.

Can it break anything on my projector?

It sends the same commands as the projector’s own menus, within the same ranges, and the projector rejects anything it doesn’t support. Save a backup before you start, and you can restore it any time.

Does it work in the dark?

Yes. The app uses white text on black, with colour only where it means something, like the red, green and blue channels. The Dim button drops your phone to minimum brightness, and the screen stays awake during long sessions.

What if the network drops mid-session?

The app keeps the connection alive and reconnects by itself if it drops, then carries on from where you were.

Is there an iPhone version?

Yes, it’s coming soon. The iPhone version is in development, with the same controls as the Android app.

Which Epson projectors work?

The EH-TW9400 and TW8400 are tested. The EH-QB1000, LS12000 / LS11000, LS9000, QS100 and QL3000 / QL7000 are in the app and still in testing. Choose your model on the Connect tab, because Epson projectors don’t report which model they are.

Why won’t my Epson accept a change?

Epson projectors only accept picture changes while they’re showing a signal. Start playback and try again: the app tells you when this is the reason.

Can I adjust Epson’s multi-point greyscale?

Not over the network on the TW9400, because Epson doesn’t make it available there. The app checks each Epson when it connects and shows multi-point greyscale if the projector allows it. Otherwise, use the projector’s own menu, which the Control tab can open.

When is Sony coming?

Sony is next, and other brands will follow. When a brand is added, an app update brings it to everyone, free to connect and view. Each brand is a separate one-off Pro unlock, or All-brands Pro covers every brand, including future ones.

Support

Found a problem or want a feature?

Use Report a bug or Request a feature on the app’s About tab: it fills in the details we need. Or email us.

Sales
Support

© 2026 Kalibrate Ltd. JVC and D-ILA are trademarks of JVCKENWOOD Corporation, Sony is a trademark of Sony Group Corporation, and Epson is a trademark of Seiko Epson Corporation. Kalibrate is not affiliated with or endorsed by these companies. Google Play is a trademark of Google LLC; iPhone is a trademark of Apple Inc.

.

Signup to our newletter to be updated on the latest offers, discount codes, news, and used stock

Weekend Specials (offers valid until 12:01am 18th May)

Use the discount code AD1PA for £100 off the ToneWinner AD-1PA+

Use the discount code 100OFF to get £100 off the RVolution PlayerPro 8K.

Use the discount code 50OFF to get £50 off the R_Volution PlayerOne 8K

Use the discount code AD7300 for £100 off the Tonewinner AD-7300PA+